[SEL] Drawbar/Turntable Trailer

[Listerdiesel]

On 10 February 2011 21:18, Listerdiesel <listerdiesel at gmail.com> wrote:
> A few of you may remember our questions regarding the brakes that we
> were going to use on the new trailer/RV that we are building.

The machining of the main pivot pin and associated pieces is almost
finished, we drop two bits down to a friend for the holes to be milled
tomorrow, pictures of the pin and other parts here:

Main pivot pin at the top, bottom cup plate on the bottom L/H, safety
cap mid bottom, thrust bearing housing right bottom.

[img]http://www.stationary-engine.net/Forum/Images/Uploaded/DBTrailer46.jpg[/img]

Part-machined blank for the pin cup about to go back on the lathe.

[img]http://www.stationary-engine.net/Forum/Images/Uploaded/DBTrailer47.jpg[/img]

Peter
-- 
Peter A Forbes
Email: listerdiesel at gmail.com
http://www.oldengine.org/members/diesel
http://stationary-engine.co.uk
http://www.oldengine.co.uk