[SEL] 5hp Ottawa Drag Saw

[Richard Strobel]

Thanks Ron..after playing with it, he's says it runs much better.

Regards,
RickinMt.


----- Original Message ----- 
From: <rdhaskell at juno.com>
To: <sel at lists.stationary-engine.com>
Sent: Wednesday, August 10, 2011 10:26 PM
Subject: Re: [SEL] 5hp Ottawa Drag Saw


> Correction Rick.  It is 5 degrees for low tension ignition, and 3 for
> high tension.  So it should be 15 degrees for his engine.
> Ron.
> 
> On Wed, 10 Aug 2011 19:01:46 -0600 "Richard Strobel"
> <Richard_Strobel7 at msn.com> writes:
> > G'day all...life is good'
> > Buddy of mine who doesn't do cyberspace has a 5hp Ottawa Dragsaw, 
> > TG, EK 
> > Fired, both valves mechanically actuated and runs around 500 rpm.  
> > It will 
> > boil water in a matter of minutes and he's wondering what the timing 
> > should 
> > be.  Says he can't find any reference on the newer engine with both 
> > valves 
> > mechanically actuated.
> > 
> >   Said he'd sure appreciate some help so told him I'd post on here.
> > 
> > Any ideas??
> > 
> > RickinMt. 
> ____________________________________________________________
> Penny Stock Jumping 3000%
> Sign up to the #1 voted penny stock newsletter for free today!
> http://thirdpartyoffers.juno.com/TGL3141/4e435a47a66ea554982st06vuc
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>