[SEL] 5hp Ottawa Drag Saw

[rdhaskell at juno.com]

Hi Rick.  The generic timing for the old engines is 5 degrees of advance
for each 100 rpm.  So 25 degrees of advance at 500.

Ron Haskell
rdhaskell at juno.com
Riverside, California USA
http://picasaweb.google.com/RonHaskell

On Wed, 10 Aug 2011 19:01:46 -0600 "Richard Strobel"
<Richard_Strobel7 at msn.com> writes:
> G'day all...life is good'
> Buddy of mine who doesn't do cyberspace has a 5hp Ottawa Dragsaw, 
> TG, EK 
> Fired, both valves mechanically actuated and runs around 500 rpm.  
> It will 
> boil water in a matter of minutes and he's wondering what the timing 
> should 
> be.  Says he can't find any reference on the newer engine with both 
> valves 
> mechanically actuated.
> 
>   Said he'd sure appreciate some help so told him I'd post on here.
> 
> Any ideas??
> 
> RickinMt. 
____________________________________________________________
Penny Stock Jumping 3000%
Sign up to the #1 voted penny stock newsletter for free today!
http://thirdpartyoffers.juno.com/TGL3141/4e4359cd8f78c554793st04vuc