[SEL] 22 hp stover

[bill boyce]

patrick, what is the bore on  your engine ?
bill
----- Original Message ----- 
From: "Patrick Livingstone" <patrick.livingstone at gmail.com>
To: "ATIS" <sel at lists.stationary-engine.com>
Sent: Monday, June 21, 2010 10:18 PM
Subject: Re: [SEL] 22 hp stover


> Hi Bill,
> I have the 22hp having 58" flywheels. The shipping weight is shown as
> 5100lbs. This is from Stover Catalogue No.20.
> Patrick
>
>
> :
>
>> tom, i measured and found the bore to be 9 5/8 inches, flywheel diameter 
>> of
>> 59 inches with a face of 4 inches,, stroke is 14 inches.....so maybe 
>> someone
>> can confirm the hp,,,wish i knew the weight of it also
>> bill boyce
>> lost prairie, arkansas
>>
>
>
>
> Patrick M Livingstone
> Leichhardt NSW
> http://www.oldengine.org/members/pml/Index.html
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>