[SEL] 22 hp stover

[Patrick Livingstone]

Hi Bill,
If you have Wendell's Power in the Past Vol3 there is a good cutaway of the
engine on page 79. If you don't I scan if for you.
The fuel return level is set in the pump by the level of the pipe into the
bowl.
The hit and miss governing is similar across all the Stover engines but I am
not sure how the throttler horizontals are setup.  I will look through my
files and see what I can find.
My vertical throttler has a different governing system to any other Stover
engines.
Patrick


On 19/7/10 12:20 PM, "bill boyce" <bboyce at swat.coop> wrote:

> making some progress on the stover,,, me and son bryan assembled enough of it
> hear it fire a couple of licks this afternoon,,,
> we're in bad need of a fuel plumbing diagram, and governor lever and springs
> layout,,, bryan said he has been asking around on
> smokestack, but hasnt had any luck,,, anyone here have any manuals or pictures
> that would help? ,,,,,, it has a fuel pump, and is set up as a
> throttler,,,cant figure out how a fuel return is to be plumbed,,,, there is no
> stand pipe in the fuel bowl of the fuel pump, or in the carb,,,i guess we
> could be missing some parts,,, just not sure,,,any help will be appreciated,,
> bill boyce
> lost prairie, arkansas
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel


Patrick M Livingstone
Leichhardt NSW
http://www.oldengine.org/members/pml/Index.html