[SEL] It's quiet!

[Dave Otto]

Nice job Rick!

Does the carriage tilt back and forth to create the taper on the shingle?
And how does the trim part of the mill work?

Thanks for sharing,
Dave


Dave Otto
Boise, Idaho




-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Richard
Strobel
Sent: Tuesday, August 24, 2010 6:28 PM
To: The SEL email discussion list
Subject: Re: [SEL] It's quiet!

I guess now is a good time to show off our Chase Shingle Mill.  Close to two
years have gone into this freshen up job and still needs some tweaking.  I
have now moved the carriage rollers up two inches and should cut an eight
inch shingle.  What your seeing is "Blue Ponderosa Pine" and not what we'd
like..that is cedar or redwood which is way too far away.  You'll see the
blue show up about half way thru the block or "bolt" as it was called.

  It's been a real joy and hope you enjoy the video also.

Sorry for the html 

http://good-times.webshots.com/video/3055285890039077051cRBfFc<http://good-t
imes.webshots.com/video/3055285890039077051cRBfFc>


Best regards...Life is good in "The Big Sky."
RickinMt.
  ----- Original Message ----- 
  From: winkandginger at aol.com<mailto:winkandginger at aol.com> 
  To:
SEL at lists.stationary-engine.com<mailto:SEL at lists.stationary-engine.com> 
  Sent: Tuesday, August 24, 2010 5:56 PM
  Subject: [SEL] It's quiet!



   The list sure is quiet, with all the folks gone to Portland. <snif>  
  Maybe next year more of us can join them!

  Wink

   


  _______________________________________________
  SEL mailing list
  SEL at lists.stationary-engine.com<mailto:SEL at lists.stationary-engine.com>
 
http://www.stationary-engine.com/mailman/listinfo/sel<http://www.stationary-
engine.com/mailman/listinfo/sel>