[SEL] thoughts on best repair

[jlb94 at juno.com]

I had a brazed rocker on my Stover that laster year & years.  Then, one day, it decided NOT to hold anymore.
I was able to buy a new cast rocker from Hit-and-Miss in Orwell.
I would braze the broken rocker and, in the mean time, look for another that isn't broke. 



Joe "Pip" Betz said that. 
jlb94 at juno.com - - - www.oldengine.org/members/betz
,-._,-.      http://community.webshots.com/user/pipbetz
\/)"(\/       "Poor is the nation having no heroes,
(_o_)        Shameful is the one having them that forgets."
                


---------- Original Message ----------
From: bill at antique-engines.com
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Subject: Re: [SEL] thoughts on best repair
Date: Mon, 30 Nov 2009 10:11:53 -0800 (PST)

I have fixed at least two such breaks by tapering each broken end so when
they are put back, it's a V around the break and brazing them, then
grinding and filing the brazing down to match. Once painted, the repair
was not visible.
They've been running for a lot of years that way.
I've also repaired other parts that way - mag trip levers, governor parts,
etc. and not had any of them re-break after 30 years.

I only own a stick welder and although have repaired cast that way, I've
had such good luck brazing...........
Don't own anything like a nice MIG or other more "fancy" (not a good word,
but if you've had the same old Forney welder for years and years, anything
else is fancy by comparison!)

Bill

> Hi all this is Jim not Dolly
>
> On Saturday me and twin bro Andy went to see a Ruston Hornsby not 15
> miles from our village that has sat there from new !!  The owner is an
> 81 year old who showed it to us and has asked us to get it running
> again. It's in quite good order, still turning freely over but a valve
> has stuck (not the problem) and years ago he kept on turning the engine
> over to budge the sticking valve ... but bust the rocker arm !!!  What
> I'm asking is, what is the best way to repair the rocker arm as it is a
> clean snap - braze, cast rod stick welded, stainless mig weld ??
> Now the dark nights are here well and propper, this will be a nice job.
> Any thoughts?
>
> JIM
>
> --
> Jim French
> fbi at insulate.co.uk
> http://www.insulate.co.uk
> http://www.oldengine.org/members/dolly/index.htm
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>


_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel
____________________________________________________________
Weight Loss Program
Best Weight Loss Program - Click Here!
http://thirdpartyoffers.juno.com/TGL2141/c?cp=DZZnnVh8zLPVJVF0hlYdtAAAJ1CD7WGpCznmC0fJ8YLWDsCVAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAEUgAAAAA=