[SEL] OT Electric trailer brakes

curt at rustyiron.com curt at rustyiron.com
Tue May 19 11:18:09 PDT 2009


>Also, use good connectors, not wire nuts.  Look at
> wwgrainger part # 4FE24.
> Bruce Younger

Bruce,
Agree with you on the wire nuts, and for that matter even the connectors
you list. I'm an advocate of soldering all wiring connections on trailers.
Last summer I even soldered the wires into the brass connectors of the
wiring harness plug. It had little pointy screws to make the electrical
connection and this was beginning to loose conductivity. The solder fixed
that for good.
Curt




More information about the sel mailing list