[SEL] OT: furnace vs generator

[Tod Engine Foundation]

I forwarded your reply directly to Andy.

Rick

----- Original Message ----- 
From: "Tom Winland" <gasenginetom at hotmail.com>
To: "SEL list" <sel at lists.stationary-engine.com>
Sent: Thursday, January 29, 2009 9:26 AM
Subject: Re: [SEL] OT: furnace vs generator



try cleaning the heat sensor that that hangs in front of the flame, sounds 
like it is not detecting the flame and shuts off,  mine does that from time 
to time and I just take it out and clean it with some sand paper and it 
works fine then.  They get a coating over time on the surface of the sensor. 
Hope this helps

Tom Winland
Ohio> From: andyglines at hotmail.com> To: sel at lists.stationary-engine.com> 
Date: Thu, 29 Jan 2009 09:09:22 -0500> Subject: [SEL] OT: furnace vs 
generator> > > Like many around here, my power is out. I have a gas furnace 
that runs on 110v and a 5000w generator. I have disconnected the furnace 
from the house and installed a 110v plug. When I plug the furnace in the 
small burner blower works and the large blower fan runs. The trouble is that 
the burner will light but goes out a few seconds later. Has anyone had this 
trouble? How did you fix it. > BTW: I use digest mode and will get your 
answers faster if you reply directly to me. > > Thanks> 
_________________________________________________________________> Windows 
Live™: E-mail. Chat. Share. Get more ways to connect. > 
http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t2_allup_explore_012009> 
_______________________________________________> SEL mailing list> 
SEL at lists.stationary-engine.com> 
http://www.stationary-engine.com/mailman/listinfo/sel
_________________________________________________________________
Windows Live™: E-mail. Chat. Share. Get more ways to connect.
http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t2_allup_howitworks_012009
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel