[SEL] Etched brass plates.

[Larry Anger]

Jerry also made me some plates for a Canadian built engine. He made them 
from a photo of an original plate that I had. The results were 
fantastic,better than original. I was extremely happy with his work.

Larry Anger
163926 Brownsville Rd.
R.R. 3 Tillsonburg, Ontario
Canada N4G 4G8
----- Original Message ----- 
From: "Arnie Fero" <fero_ah at city-net.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Thursday, December 17, 2009 10:16 AM
Subject: Re: [SEL] Etched brass plates.


> HEAR!!  HEAR!!  Not only does Jerry do an EXCELLENT job of reproducing a
> manufacturer's plate; he is also FANTASTIC at creating a new plate in the 
> vintage
> style.  He did one for me for the "Fankhauser Engine Company" for an 
> engine that my
> engine buddy, the late John Fankhauser, built.  What a gorgeous tag.  It 
> is a very
> nice finishing touch for the engine.
>
> In fact, those of you who design and build model engines should have Jerry 
> design
> and build "maker's plates" for your engines.  8-))
>
> See ya,  Arnie
>
> On Thu, December 17, 2009 8:09 am, Bill Brueck wrote:
>> A  bargain at any price.  I've bought a number of plates from Jerry and 
>> the
>> workmanship is superb.
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>