[SEL] magnet charger

[jacob warner]

Elden,

Have you collected any data on gauss measuments for different types of
magnetos?

-Jacob

On Thu, Dec 3, 2009 at 10:57 AM, Elden DuRand <edurand at mchsi.com> wrote:

> Ed:
>
> It doesn't really matter that they're in series or parallel as long as the
> two coils are -either- wired in the same direction and connected backwards
> (in electrical polarity) or are wound in opposite directions and hooked
> together with the same electrical polarity.  Rule of Thumb applies.
>
> Well - if you do connect them in series, you will need double the voltage
> to get the same magnetic field.
>
> And, yes, I still have my Gaussmeter.  Checked it out the other day and the
> original battery is still good.  I need to start taking it to shows.
>
> Take care - Elden
> http://www.oldengine.org/members/durand
>
> > -----Original Message-----
> > From: sel-bounces at lists.stationary-engine.com
> > [mailto:sel-bounces at lists.stationary-engine.com]On
> >  Behalf Of Ed stoller
> > Sent: Wednesday, December 02, 2009 09:03 PM
> > To: The SEL email discussion list
> > Subject: Re: [SEL] magnet charger
> >
> >
> > Oops, got that backwards. I need to put the coils
> > in parallel, not series.
> > Ed Stoller
> > New Fairfield, CT
> > http://home.earthlink.net/~edstoller/
>
>
>  _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>