[SEL] magnet charger

[Elden DuRand]

Ed:

It doesn't really matter that they're in series or parallel as long as the two coils are -either- wired in the same direction and connected backwards (in electrical polarity) or are wound in opposite directions and hooked together with the same electrical polarity.  Rule of Thumb applies.

Well - if you do connect them in series, you will need double the voltage to get the same magnetic field.

And, yes, I still have my Gaussmeter.  Checked it out the other day and the original battery is still good.  I need to start taking it to shows.

Take care - Elden
http://www.oldengine.org/members/durand 

> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com]On
>  Behalf Of Ed stoller
> Sent: Wednesday, December 02, 2009 09:03 PM
> To: The SEL email discussion list
> Subject: Re: [SEL] magnet charger
> 
> 
> Oops, got that backwards. I need to put the coils 
> in parallel, not series.
> Ed Stoller
> New Fairfield, CT
> http://home.earthlink.net/~edstoller/