[SEL] flat belt pulley's

[Larry Evans]

George,

I know you are thinking of engines a little more exotic but a Fairbanks 
Morse ZD seems to meet your description.

Larry Evans

At 09:38 AM 8/20/2009, you wrote:
>This past weekend I was at a show, and the host of the show had nice 2hp 
>tank cooled engine for me to play with.
>
>This is a early (1901-1903) engine and one of the things I noticed on this 
>engine was that the flat belt pulley was actually cast with the 
>flywheel.  In other words the pulley cannot be removed or separated from 
>the flywheel.
>
>I cannot think of any other engines at the moment with the flywheel and 
>pulley cast together.
>
>Does anyone here know of some examples?
>
>This is only for flat belt pulleys, not vee belt grooves cut into the 
>flywheel face or any other engines where the flywheel face is being used 
>as the pulley.  I mean examples that look like a common bolt on flat belt 
>pulley or the type that would slide on the crankshaft.
>
>George
>
>
>This message and any attachments are intended only for the use of the 
>addressee and may contain information that is privileged and confidential. 
>If the reader of the message is not the intended recipient or an 
>authorized representative of the intended recipient, you are hereby 
>notified that any dissemination of this communication is strictly 
>prohibited. If you have received this communication in error, please 
>notify us immediately by e-mail and delete the message and any attachments 
>from your system.
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel

Larry Evans
MailTo:LFEVANS at pacbell.net
http://www.oldengine.org/members/levans/