[SEL] flat belt pulley's

[Judge Tommy Turner]

Springfield engines had the pulley and flywheel cast together.  I had
another engine here that the pulley and flywheel were cast as one but
darned if I can remember the name right now.  If I come up with it I'll
pass it on.

Tommy Turner
Magnolia, KY




-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Best,
George
Sent: Thursday, August 20, 2009 12:38 PM
To: The SEL email discussion list
Subject: [SEL] flat belt pulley's

This past weekend I was at a show, and the host of the show had nice 2hp
tank cooled engine for me to play with.

This is a early (1901-1903) engine and one of the things I noticed on
this engine was that the flat belt pulley was actually cast with the
flywheel.  In other words the pulley cannot be removed or separated from
the flywheel.

I cannot think of any other engines at the moment with the flywheel and
pulley cast together.

Does anyone here know of some examples?

This is only for flat belt pulleys, not vee belt grooves cut into the
flywheel face or any other engines where the flywheel face is being used
as the pulley.  I mean examples that look like a common bolt on flat
belt pulley or the type that would slide on the crankshaft.

George


This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and
confidential. If the reader of the message is not the intended recipient
or an authorized representative of the intended recipient, you are
hereby notified that any dissemination of this communication is strictly
prohibited. If you have received this communication in error, please
notify us immediately by e-mail and delete the message and any
attachments from your system.

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel