[SEL] flat belt pulley's

[Mark Shulaw]

Early Maytag engines built by Elgin were that way. Mark


At 12:38 PM 8/20/2009, you wrote:
>This past weekend I was at a show, and the host of the show had nice 
>2hp tank cooled engine for me to play with.
>
>This is a early (1901-1903) engine and one of the things I noticed 
>on this engine was that the flat belt pulley was actually cast with 
>the flywheel.  In other words the pulley cannot be removed or 
>separated from the flywheel.
>
>I cannot think of any other engines at the moment with the flywheel 
>and pulley cast together.
>
>Does anyone here know of some examples?
>
>This is only for flat belt pulleys, not vee belt grooves cut into 
>the flywheel face or any other engines where the flywheel face is 
>being used as the pulley.  I mean examples that look like a common 
>bolt on flat belt pulley or the type that would slide on the crankshaft.
>
>George
>
>
>This message and any attachments are intended only for the use of 
>the addressee and may contain information that is privileged and 
>confidential. If the reader of the message is not the intended 
>recipient or an authorized representative of the intended recipient, 
>you are hereby notified that any dissemination of this communication 
>is strictly prohibited. If you have received this communication in 
>error, please notify us immediately by e-mail and delete the message 
>and any attachments from your system.
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel
>
>No virus found in this incoming message.
>Checked by AVG - www.avg.com
>Version: 8.5.409 / Virus Database: 270.13.62/2315 - Release Date: 
>08/20/09 06:05:00


Mark Shulaw
454 Co. Rd. 33
Bluffton, OH. 45817
USA

Frappi at wcoil.com / 419.358.5206  Home / 419.516.2996 Ver. Cell.
Hobby Collector and Dealer in Maytag Multi-Motor Engine parts.
VISIT the Maytag Collectors Club at  www.Maytagclub.com