[SEL] Fairbanks Morse N

[Edd Payne]

Hi All.The 1.5& 2hpZ throttlers use the same parts (except for the 
headless1.5)
EDD PAYNE
PO Box 364 Gulgong N.S.W
Australia
2852
Phone:0263742387
edsengns at optusnet.com.au
edsengns
----- Original Message ----- 
From: "Al Harris" <al.harris at rustic-engines.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Wednesday, April 15, 2009 8:12 AM
Subject: Re: [SEL] Fairbanks Morse N


> Jim,
>
> 553711    -   1923
>
> As luck would have it, the 2 & 3hp engines do not have diagonal cam gear
> and gov parts interchangeable with the 1.5hp model. Also, very few 1.5's
> made it to Oz, the larger ones being preferred.
>
> When you grab one, would you kindly package and post the parts I need to
> Oz, because, I surely don't want the "bulky" bit sent over. ;-)
>
> You can see what I have here:
>
>> http://www.rustic-engines.com/
>
> ps: it now has the true 1.5hp mixer on it, not the 3hp one seen in the 
> pic.
>
> Cheers,
>
> Al Harris
> Summer Clarence Coast NSW Oz
>
> al.harris at rustic-engines.com
>
>
>
> Jim O'Hagan wrote:
>> Al, what's the serial # so I have an idea of when it was built. Do you 
>> know
>> if any other HP. Eng.s will interchange? If I see a Parts engine at a 
>> swap
>> meet, I'll grab it for ya. Jimmy
>>
>> Jim O'Hagan
>>
>> -----Original Message-----
>> From: sel-bounces at lists.stationary-engine.com
>> [mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Al Harris
>> Sent: Tuesday, April 14, 2009 1:37 PM
>> To: The SEL email discussion list
>> Subject: Re: [SEL] Fairbanks Morse N
>>
>> While you fellas are looking around remember me.
>>
>> 1.5hp FMZ throttle governed diagonal cut cam gear, governor bits, and
>> the two rods (valve and carby).
>>
>> Cheers,
>>
>> Al Harris
>> Summer Clarence Coast NSW Oz
>>
>> al.harris at rustic-engines.com
>>
>>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>