[SEL] Fairbanks Morse N

[Jim O'Hagan]

Al, what's the serial # so I have an idea of when it was built. Do you know
if any other HP. Eng.s will interchange? If I see a Parts engine at a swap
meet, I'll grab it for ya. Jimmy

Jim O'Hagan

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Al Harris
Sent: Tuesday, April 14, 2009 1:37 PM
To: The SEL email discussion list
Subject: Re: [SEL] Fairbanks Morse N

While you fellas are looking around remember me.

1.5hp FMZ throttle governed diagonal cut cam gear, governor bits, and 
the two rods (valve and carby).

Cheers,

Al Harris
Summer Clarence Coast NSW Oz

al.harris at rustic-engines.com



Judge Tommy Turner wrote:
> Once you know what it needs, get in touch with me.  I know a gent who
> used to have an 8 HP throttler N carb.  I don't know if he still has it
> or not but it would be worth a call to find out.
>
> Tommy Turner
>
>
>
> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Jim
> O'Hagan
> Sent: Tuesday, April 14, 2009 1:52 PM
> To: 'The SEL email discussion list'
> Subject: Re: [SEL] Fairbanks Morse N
>
> Hi Tommy, I have a chance to buy a "N" and it might be a throttler with
> a
> wrong carb on it. Right now there are no pictures. Won't know much more
> until the weekend. With whats going on recently with the prices on these
> things, as you KNOW, I thought it is tmime to buy one if it's
> reasonable.
> CYA, Jimmy
>
> Jim O'Hagan
>
>
>   
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel