[SEL] Penetrating Oils

[Edd Payne]

The same approach works well for me to.
EDD PAYNE
PO Box 364 Gulgong N.S.W
Australia
2852
Phone:0263742387
edsengns at optusnet.com.au
edsengns
----- Original Message ----- 
From: "Elden DuRand" <edurand at mchsi.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Thursday, April 09, 2009 7:53 AM
Subject: Re: [SEL] Penetrating Oils


> Tommy:
>
> Why don't you whip-up a batch of the stuff and give it a shot then report 
> back here on the results.
>
> As for me, unless it's something I can't get replacement fasteners for, I 
> simply use the gorilla approach along with heat, a hammer and a generous 
> helping of blue language.  If I break the sucker, it deserved it's fate!
>
> Take care - Elden DuRand
> edurand at mchsi.com
> http://www.oldengine.org/members/durand
>
>> -----Original Message-----
>> From: sel-bounces at lists.stationary-engine.com
>> [mailto:sel-bounces at lists.stationary-engine.com]On
>>  Behalf Of Judge Tommy
>> Turner
>> Sent: Wednesday, April 08, 2009 08:28 AM
>> To: 'The SEL email discussion list'
>> Subject: [SEL] Penetrating Oils
>>
>>
>> A friend, who is an SEL member, sent the info
>> below.  Quite interesting.
>> Looks like I might buy a can of acetone and ATF.
>>
>> Tommy Turner
>> Magnolia, KY  USA
>>
>>
>> Machinist's Workshop magazine actually tested
>> penetrants for break out
>> torque on rusted nuts.
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>