[SEL] Brass fitting info wanted in Oz

[Peter Lowe]

Elden
Yes had a look there, will try here first then they are my next step, I am a 
little fussy what type of fitting I use on this job.
Thanks mate.
Peter




> Peter:
>
> If you don't mind purchasing the fittings from "The Colonies", go to
>
> HTTP://WWW.MCMASTER.COM
>
> And search for "Brass Pipe Fittings".
>
> Take care - Elden
> http://www.oldengine.org/members/durand
>
>> -----Original Message-----
>> From: sel-bounces at lists.stationary-engine.com
>> [mailto:sel-bounces at lists.stationary-engine.com]On
>>  Behalf Of Peter Lowe
>> Sent: Saturday, September 20, 2008 11:46 PM
>> To: Oldengine.org; ATIS
>> Subject: [SEL] Brass fitting info wanted in Oz
>>
>>
>> Hi all
>>
>> Is there someone in Australia that sells 1/8"
>> Brass Square Head Plugs like
>> the one on the right side of second row of this link.
>> http://plumbing.hardwarestore.com/52-330-brass-cap
>> s-and-plugs.aspx
>> I want solid plugs, not cored or hollow.
>>
>> I also want brass 1/4" BSP or NPT Unions, third
>> row middle photo below.
>> http://plumbing.hardwarestore.com/52-330-brass-uni
>> ons-and-couplings.aspx
>>
>>  and 5/8" brass pipe, to thread 1/4" NPT or BSP,
>> about 3 foot long.
>>
>> Regards
>> Peter Lowe
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel