[SEL] Brass fitting info wanted in Oz

[Elden DuRand]

Peter:

If you don't mind purchasing the fittings from "The Colonies", go to

HTTP://WWW.MCMASTER.COM

And search for "Brass Pipe Fittings".

Take care - Elden
http://www.oldengine.org/members/durand 

> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com]On
>  Behalf Of Peter Lowe
> Sent: Saturday, September 20, 2008 11:46 PM
> To: Oldengine.org; ATIS
> Subject: [SEL] Brass fitting info wanted in Oz
> 
> 
> Hi all
> 
> Is there someone in Australia that sells 1/8" 
> Brass Square Head Plugs like 
> the one on the right side of second row of this link.
> http://plumbing.hardwarestore.com/52-330-brass-cap
> s-and-plugs.aspx
> I want solid plugs, not cored or hollow.
> 
> I also want brass 1/4" BSP or NPT Unions, third 
> row middle photo below.
> http://plumbing.hardwarestore.com/52-330-brass-uni
> ons-and-couplings.aspx
> 
>  and 5/8" brass pipe, to thread 1/4" NPT or BSP, 
> about 3 foot long.
> 
> Regards
> Peter Lowe