[SEL] apple cider mill help

[Frank]

should bring it to me so I can run it with a stationary engine then you will 
not need additional pulley

Frank
gremaux at midrivers.com
There is no place like 127.0.0.1

----- Original Message ----- 
From: <Germoamer at aol.com>
To: <sel at lists.stationary-engine.com>
Sent: Thursday, October 09, 2008 6:15 PM
Subject: [SEL] apple cider mill help


> Friend called tonight.  He wants to fix up and old apple cider  mill to 
> grind
> cider using an electric motor.  The mill has a 10  inch x 2 1/2 inch flat
> pulley on it.  Motor is 1725 rpm with a 5/8 diameter  shaft and 3/16 
> keyway.
> What would be the recommended rpm of the  mill?  And then where can we 
> find a
> pulley short of making one?  Of  course it is probably a small pulley and 
> could
> make an aluminum one on the old  SB lathe.
>
> Thanks,
>
>
>
> Tom  Schmutz
> Concord, Va.
> germoamer at AOL.com
>
>
>
> **************New MapQuest Local shows what's happening at your 
> destination.
> Dining, Movies, Events, News & more. Try it out!
> (http://local.mapquest.com/?ncid=emlcntnew00000001)
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>