[SEL] Engine fuel and water pump rebuilding

[Mark L Shattuck]

Rob Skinner wrote:
> On Nov 7, 2008, at 3:31 PM, Jim O'Hagan wrote:
>
>   
>> I need packing for both a large fuel pump and a large water pump ,  
>> both
>> piston type pumps. They would both hold ½” dia. Packing. What hi  
>> tech stuff
>> is available and who sells it? Ace Hardware has smaller packing and  
>> sells in
>> packages by the inch. I need 1 ½’ of each or 3’ for both if  
>> suitable. Thank
>> you for any help or suggestions on getting apiece of yard art  
>> running. Jimmy
>> O’Hagan,415 892 0236, Novato, Ca.
>>     
>
> Hi Jimmy,
> McMaster-Carr sells all sorts of packing--different shapes, sizes and  
> materials.  Their catalog describes the proper use of each.  Check 'em  
> out at www.mcmaster.com
>
> Rob
>
>
>
>
>
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>   


Jimmy  Try This Link I used there products for years  . Click On 
Distributor Locator
Mark

http://www.chesterton.com/products/mp/product/?product=328