[SEL] Still in pieces after all these years

[Steve Royster]

Arnie, Did you conveniently forget to say that  rebuilding  the Fero  air compressor got in the way of your engine projects???   Steve
 
 
 
> Date: Mon, 15 Dec 2008 17:55:40 -0500> From: fero_ah at city-net.com> To: sel at lists.stationary-engine.com> Subject: Re: [SEL] Still in pieces after all these years> > Hi George,> > I've got two engines in that condition.> > One, a 5 hp Lister CS rad cooled that's got stuck governor weights.> Should be simple, just pull the side plate off, but because of the rad fan drive> belt pulley, you _just_ can't get the plate off. Without pulling the flywheel> that is. 8-(( I'm currently leaning toward shortening the studs for the cover> plate. > > The second one is a 3 hp CH&E factory mudpump rig. I pulled the head and piston> to fix the broken-off drip oiler pipe (through the hopper into the cylinder). > That job was finished quickly, but some distraction set in and the bits never> got put back together. I sure do HOPE I can put my paws on all of the bits> when "The Time" comes. 8-))> > Great thread starter question!!> > See ya, Arnie> > Quoting "Best, George" <George_Best at adp.com>:> > > Here's another topic.> > > > What engine(s) do you still have in pieces? Basically, these are> > engines that you took apart to restore and then got sidetracked on other> > projects and still haven't gotten the engine back together.> > > > I've got 3 such engines.> > > _______________________________________________> SEL mailing list> SEL at lists.stationary-engine.com> http://www.stationary-engine.com/mailman/listinfo/sel
_________________________________________________________________
You live life online. So we put Windows on the web. 
http://clk.atdmt.com/MRT/go/127032869/direct/01/