[SEL] Spam> Gear source- Martin sprocket

[Paul + Colleen Gray]

Fellow ferrites-

I recently bought some steel spur gears from Martin Sprocket (http://www.martinsprocket.com/home.htm 
) for my 2 HP ARACO project. I needed a 3" 36 tooth and 6" 72 tooth 12  
DP gears. Total with ship was ~110 bucks. These were solid 7/8" thick  
with  a thick hub.  Nice stuff to machine to enlarge the bores. The  
only down side is you have to purchase through a local distributor,  
but they came up with one close to me. You might want to compare them  
to Boston.

Paul Gray