[SEL] Wheel Horse parts

[rdhaskell at juno.com]

 Hi Rick.  
Surely you have already thought of these but.  Use two separate bearings.
 Replace with bronze bushing.  Pour babbitt for a new bearing.

Ron Haskell
rdhaskell at juno.com
Riverside, California USA
http://picasaweb.google.com/RonHaskell

On Tue, 5 Aug 2008 23:03:06 -0400 "Tod Engine Foundation"
<rowlands1941 at roadrunner.com> writes:
> I have a WH A-100 lawn tractor. Built only in 1977-78.  The jackshaft 
> which 
> transmits power from the engine belt to the deck belt lost its 
> bearings, and 
> you can't get a replacement.  It was specially made with two ball 
> bearings 
> on a common outer race about 2" apart.  Specially made for Wheel 
> Horse.  So 
> what do you do with an old WH that is fully functional except for a 
> stinkin 
> bearing?
> 
> I guess you scrap it, but I can't bring myself to do that just yet.  
> If it 
> had a Tecumseh engine I would send you the part you need.  But alas 
> its a 10 
> HP Briggs.
> 
> Rick
____________________________________________________________
Stop foreclosure.  Click here to stay in your home and rebuild credit.
http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3meXxHccXzDkBYDIDVh4WNLNSYZwarFpRVYg0fgLZPdty0YV/