[SEL] Famous help

[John Hall]

Glad to hear it is out!
Is this the same Famous you had at Reidsville last year?

John
----- Original Message ----- 
From: <Germoamer at aol.com>
To: <sel at lists.stationary-engine.com>
Sent: Sunday, April 20, 2008 6:57 PM
Subject: Re: [SEL] Famous help


> John,
>
> Thanks, the pin is out.  The problem was the pin was recessed  down in the
> gear on both sides, so very hard to tell what it was, and I  thought of 
> the
> tapered pin too. Figuring it had to come out one way or the  other, found 
> a small
> end mill and away I went.  The pin was very recessed  on one side, so this
> gave me something to align the end mill to.  It was a  straight steel pin,
> apparently a forced fit to the shaft.  Headed to a  friends machine shop 
> in the
> morning for some precise machining!
>
> Thanks,
>
> Tom  Schmutz
> Concord,  Va.
> germaoamer at AOL.com
>
>
>
>
> **************Need a new ride? Check out the largest site for U.S. used 
> car
> listings at AOL Autos.
> (http://autos.aol.com/used?NCID=aolcmp00300000002851)
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel