[SEL] Head bolt stuck

[cgandree at mchsi.com]

Francis there is approx 1/4" of the stud bolt sticking up out of the block so 
I may just go the welding, heat method but as mentioned wanted to try MO-44 
rust buster.
thank you,
Curt


----------------------  Original Message:  ---------------------
From:    FRM8198 at aol.com
To:      sel at lists.stationary-engine.com
Subject: Re: [SEL] Head bolt stuck
Date:    Sun, 30 Sep 2007 15:04:35 +0000

>  
> In a message dated 9/30/2007 7:43:19 A.M. Pacific Daylight Time,  
> paulmaples at sbcglobal.net writes:
> 
> Curt how  much of the stud is still sticking above the casting.
> 
> 
> Is the head removed?  If so, place a nut  (with a  diameter slightly smaller 
> than the diameter of the broken stud) over the broken  stud and carefully arc 
> weld the nut to the stud.  Let cool and it should  unscrew with a wrench.  
> 
> Francis Maciel
> Santa Maria, Ca  93454
> 
> 
> 
> 
> ************************************** See what's new at http://www.aol.com
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel