[SEL] Laminated shims

[David Rotigel]

Hi Rick, Why on earth do you want laminated shims?
	Dave


--------
David Rotigel
rotigel at alltel.net



On Nov 23, 2007, at 10:23 AM, Richard Strobel wrote:

>
>   Well, the hogfest is over, little snow on the ground, 8 above  
> zero and
> life is good in the Big Sky.  Old iron is on hold as shed is getting a
> complete makeover...there's a floor there somewhere <vbg>.
>
>   Been toying with the idea of making my own laminated shims out  
> of...well
> you guessed it.  I'm thinking around .032" or something thin enough  
> to cut
> and punch.  Used some super glue with undesirable results but it  
> was old.
> Anyone ever played around with this idea and what did you use for  
> glue?  As
> you all might know, laminated shim stock is very pricy.
>
>   Turkey sandmiches today....Yahoo!!!
>
>   TIA,
> RickinMt.
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel