[SEL] Laminated shims

[Richard Strobel]

  Well, the hogfest is over, little snow on the ground, 8 above zero and 
life is good in the Big Sky.  Old iron is on hold as shed is getting a 
complete makeover...there's a floor there somewhere <vbg>.

  Been toying with the idea of making my own laminated shims out of...well 
you guessed it.  I'm thinking around .032" or something thin enough to cut 
and punch.  Used some super glue with undesirable results but it was old. 
Anyone ever played around with this idea and what did you use for glue?  As 
you all might know, laminated shim stock is very pricy.

  Turkey sandmiches today....Yahoo!!!

  TIA,
RickinMt.