[SEL] 2 hp ottawa drag saw clutch

[Rex Hinz]

   Thanks Dave;

 I was on your engine site and the 5 HP is different with the control lever 
on the engine side of the clutch and only one flywheel ,the one we have 
looks like it will be on the outside of the clutch , Oh by the way you have 
a great home page I really enjoyed looking ,  thanks for your quick reply 
Dave.

Rex
----- Original Message ----- 
From: "Dave Rotigel" <rotigel at alltel.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Monday, May 14, 2007 5:52 PM
Subject: Re: [SEL] 2 hp ottawa drag saw clutch


> At 04:42 PM 5/14/2007, you wrote:
>>Hi all ;
>>     My brother needs some help with his Ottawa Drag Saw ,its a 2HP double
>> flywheel it is missing the outer clutch parts but we don't know what we
>> need , the inner disk is there and the small gear but the parts to push
>> the clutch disk are all missing ,  If any one has any pictures or parts
>> please let me know , I have not found much info on the Ottawa's ,
>>     I also brought home another engine from the Baraboo Swap Meet Auction
>> , It is also an Ottawa 2 Hp but has a pulley instead of the clutch , this
>> time I was a little smarter  , I also bought some yard decorations for My
>> Lady and the thunder lightening was minimal :-)) I guess I should have
>> learned that long ago .
>>Rex Hinz
>
> Hi Rex,
>          I have a 5 HP Ottawa drag saw here. Don't know if the clutch
> set-up is the same, or not, but I can take pictures if you wish. I also
> have the manual for the 5 HP which shows the clutch parts. I could copy it
> and snail it to you if you think that would help.
>         Dave
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>