[SEL] Gib key puller

[Paul Maples]

Jerry when I click on "see him" I get a message that this page cannot be 
found.

Paul

----- Original Message ----- 
From: "Jerry Evans" <jerrye at databak.co.za>
To: <sel at lists.stationary-engine.com>
Sent: Friday, May 04, 2007 2:39 PM
Subject: [SEL] Gib key puller


> Hi Guys,
>         There have been many discussions about removing Gib keys on the 
> lists.
>         I needed something to pull the key on my restored Ruston & Hornsby
> because it had an oil leak on the timing gear cover.
>         This cover is right up against the inside of the flywheel and
> there is no way of removing it without removing the flywheel.
>         I did not want to use anything that would damage the paint on the
> flywheel.
>         Here is what I came up with:
>
> <http://www.oldengine.org/members/evans/gibpull/index.htm>
>
>         I