[SEL] Gasket material for oilers?

[Dave Ernst]

If you don't use the proper type o-rings the will swell after exposure to 
oil and likely slip from beneath the glass. the style to use is found in 
automatic transmission work and they will be color coded other than straight 
black.
Use Starbolt's corks or make your own as suggested.
My two bits
Dave
----- Original Message ----- 
From: "R & M Ingold" <randmingold at hotkey.net.au>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, May 01, 2007 7:26 PM
Subject: Re: [SEL] Gasket material for oilers?


>O rings
> Reg & Marg Ingold.
> Newcastle, NSW, Australia.
> randmingold at hotkey.net.au
> http://www.oldengine.org/members/randmingold
>
> ----- Original Message ----- 
> From: "Paul Maples" <paulmaples at sbcglobal.net>
> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> Sent: Wednesday, May 02, 2007 11:38 AM
> Subject: [SEL] Gasket material for oilers?
>
>
>> Hey Gang what is the best gasket material to use for the oiler glasses?
>>
>> A friend of mine suggested 1/8" neoprene but I am afraid I will not be
>> able to find this in my small town, what are some other suggestions?
>>
>> Paul
>>
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>