[SEL] How to Straighten Spoke in Cart Wheel

[Paul Maples]

Thanks Gary, I am not sure how much pressure it would take to knock it back 
in line and I sure do not want to crack it if it is fragile from years of 
stress.

Paul

----- Original Message ----- 
From: <garyepps at fidnet.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Monday, March 26, 2007 10:27 PM
Subject: Re: [SEL] How to Straighten Spoke in Cart Wheel


> Paul,
>
> That's not bent very bad.  If it was mine I would just put a block of wood
> under it and tap it back in place with a hammer.  If you put a block of 
> wood
> between the hammer and the spoke you won't leave any hammer marks on the
> spoke.