[SEL] Need Feedback on Cart Bolster Design

[Paul Maples]

Thanks John for the comment.

Paul

----- Original Message ----- 
From: "JOHN EATON" <john.eaton at ns.sympatico.ca>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Monday, March 26, 2007 8:14 PM
Subject: Re: [SEL] Need Feedback on Cart Bolster Design


>I haven't built any carts but I have fixed up a couple of orchard  
> sprayers and this drawing seems to be fine although my sprayer wagons  
> did not have the pivot pin. They just flex.  Looks good to me
> On 26-Mar-07, at 9:55 PM, Paul Maples wrote:
> 
>> I am now getting ready to start the construction of my cart for my  
>> 5 HP 1905 Vertical Stover and I will be using 4" X 6" Oak Beams for  
>> the construction. I have been trying to figure out how best to  
>> build the 5th wheel (front bolster) so that the front axle will  
>> pivot up and down as well as side from side. I have come up with  
>> this rough design and drawing. This is a very rough drawing but  
>>