[SEL] Riveting

[Peter Lowe]

Hi Paul
No one of this forum is dumb, that is why this is such a great group. There 
are all walks of life and experiecnes here.
I would bid on that eBay stuff but the postage to Oz in a killer ;-(((

Regards
Peter Lowe
R&V Engine Registrar
Australia
Ph: 61-266453455
http://www.oldengine.org/members/plowe/rv-engines/rvpage.htm
http://www.oldengine.org/members/plowe/rv-engines/rv-register.htm



> Thanks Peter, pictures sure help a dumb person understand.
>
> Paul
>
> ----- Original Message ----- 
> From: "Peter Lowe" <plowe at exemail.com.au>
> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> Sent: Thursday, January 25, 2007 10:03 PM
> Subject: Re: [SEL] Riveting
>
>
>> Hi guys
>>
>> I am not the expert here but these are what I have and typically can't 
>> find the rest somewhere in my shed.
>> http://www.oldengine.org/members/plowe/rv-engines/rivets.htm this is a 
>> dead link off my R&V site.
>> You can see the form part of the tool, not sure what the hole is used 
>> for, I asked my Dad but he is not sure either. The other top hole goes 
>> down about 3/4" and has another hole coming in from the edge???
>>
>> Also look at:
>> http://www.frost.co.uk/item_Detail.asp?productID=9354
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>