[SEL] Thermo-syphon Question

peter ogborne jopeter at omninet.net.au
Fri Jan 19 00:50:58 PST 2007


I'm frightened to make a comment!
----- Original Message ----- 
From: "R & M Ingold" <randmingold at hotkey.net.au>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Friday, January 19, 2007 4:01 PM
Subject: Re: [SEL] Thermo-syphon Question


> So? Ok, have it your way. I aint here for an argument!
> Reg & Marg Ingold.
> Newcastle, NSW, Australia.
> randmingold at hotkey.net.au
> http://www.oldengine.org/members/randmingold
>
> ----- Original Message ----- 
> From: "Edd Payne" <edsengns at optusnet.com.au>
> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> Sent: Friday, January 19, 2007 6:36 PM
> Subject: Re: [SEL] Thermo-syphon Question
>
>
>> Got to contest this Reg.The IHC  screen cooled Moguls thermo siphon and 
>> the water is well below the outlet.The water expands with heat and flows 
>> over the screen.There is no pump.It works great.Anyone with one of these 
>> engines will tell you this.Also the water tank on my tank cooled Stover W 
>> has the top water outlet above the top water level.It does the same thing 
>> as the Mogul and you can see the water flowing out of the top pipe as it 
>> heats up.
>> EDD PAYNE
>> PO Box 364 Gulgong N.S.W
>> Australia
>> 2852
>> Phone:0263742387
>> edsengns at optusnet.com.au
>> edsengns
>> ----- Original Message ----- 
>> From: "R & M Ingold" <randmingold at hotkey.net.au>
>> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
>> Sent: Friday, January 19, 2007 3:35 PM
>> Subject: Re: [SEL] Thermo-syphon Question
>>
>>
>>> If ya aint got a pump, how can it "Circulate"?
>>> Gotta have water 'above' the curcuit.
>>> Reg & Marg Ingold.
>>> Newcastle, NSW, Australia.
>>> randmingold at hotkey.net.au
>>> http://www.oldengine.org/members/randmingold
>>>
>>> ----- Original Message ----- 
>>> From: "Paul Maples" <paulmaples at sbcglobal.net>
>>> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
>>> Sent: Friday, January 19, 2007 1:23 PM
>>> Subject: Re: [SEL] Thermo-syphon Question
>>>
>>>
>>>> So Reg the top pipe has to be below the water level, right?
>>>>
>>>> Paul
>>>>
>>>> ----- Original Message ----- 
>>>> From: "R & M Ingold" <randmingold at hotkey.net.au>
>>>> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
>>>> Sent: Thursday, January 18, 2007 8:06 PM
>>>> Subject: Re: [SEL] Thermo-syphon Question
>>>>
>>>>
>>>>> As long as the top pipe is below the water,and there is a difference 
>>>>> in height of inlets and outlets, it will work ok.
>>>>> Reg & Marg Ingold.
>>>>> Newcastle, NSW, Australia.
>>>>> randmingold at hotkey.net.au
>>>>> http://www.oldengine.org/members/randmingold
>>>>>
>>>>> ----- Original Message ----- 
>>>>>
>>>>
>>>> _______________________________________________
>>>> SEL mailing list
>>>> SEL at lists.stationary-engine.com
>>>> http://www.stationary-engine.com/mailman/listinfo/sel
>>>>
>>>
>>> _______________________________________________
>>> SEL mailing list
>>> SEL at lists.stationary-engine.com
>>> http://www.stationary-engine.com/mailman/listinfo/sel
>>
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
> 





More information about the sel mailing list