[SEL] Thermo-syphon Question

[R & M Ingold]

So? Ok, have it your way. I aint here for an argument!
Reg & Marg Ingold.
Newcastle, NSW, Australia.
randmingold at hotkey.net.au
http://www.oldengine.org/members/randmingold

----- Original Message ----- 
From: "Edd Payne" <edsengns at optusnet.com.au>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Friday, January 19, 2007 6:36 PM
Subject: Re: [SEL] Thermo-syphon Question


> Got to contest this Reg.The IHC  screen cooled Moguls thermo siphon and 
> the water is well below the outlet.The water expands with heat and flows 
> over the screen.There is no pump.It works great.Anyone with one of these 
> engines will tell you this.Also the water tank on my tank cooled Stover W 
> has the top water outlet above the top water level.It does the same thing 
> as the Mogul and you can see the water flowing out of the top pipe as it 
> heats up.
> EDD PAYNE
> PO Box 364 Gulgong N.S.W
> Australia
> 2852
> Phone:0263742387
> edsengns at optusnet.com.au
> edsengns
> ----- Original Message ----- 
> From: "R & M Ingold" <randmingold at hotkey.net.au>
> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> Sent: Friday, January 19, 2007 3:35 PM
> Subject: Re: [SEL] Thermo-syphon Question
>
>
>> If ya aint got a pump, how can it "Circulate"?
>> Gotta have water 'above' the curcuit.
>> Reg & Marg Ingold.
>> Newcastle, NSW, Australia.
>> randmingold at hotkey.net.au
>> http://www.oldengine.org/members/randmingold
>>
>> ----- Original Message ----- 
>> From: "Paul Maples" <paulmaples at sbcglobal.net>
>> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
>> Sent: Friday, January 19, 2007 1:23 PM
>> Subject: Re: [SEL] Thermo-syphon Question
>>
>>
>>> So Reg the top pipe has to be below the water level, right?
>>>
>>> Paul
>>>
>>> ----- Original Message ----- 
>>> From: "R & M Ingold" <randmingold at hotkey.net.au>
>>> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
>>> Sent: Thursday, January 18, 2007 8:06 PM
>>> Subject: Re: [SEL] Thermo-syphon Question
>>>
>>>
>>>> As long as the top pipe is below the water,and there is a difference in 
>>>> height of inlets and outlets, it will work ok.
>>>> Reg & Marg Ingold.
>>>> Newcastle, NSW, Australia.
>>>> randmingold at hotkey.net.au
>>>> http://www.oldengine.org/members/randmingold
>>>>
>>>> ----- Original Message ----- 
>>>>
>>>
>>> _______________________________________________
>>> SEL mailing list
>>> SEL at lists.stationary-engine.com
>>> http://www.stationary-engine.com/mailman/listinfo/sel
>>>
>>
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>