[SEL] Electrolysis on a 3 HP Novo

[Mark Shulaw]

Hi Dave,
  I've never seen any harm to lead or babbit. It will darken it but thats 
the worst I've seen. It will come right off with a tooth brush sized wire 
brush.                     TTYL,    Mark

At 04:00 PM 2/19/07, you wrote:
>I'm going to make a tank and try the electrolysis rust removal trick that 
>was discussed in debth here a while back. Question I have, is it safe on 
>babbit bearings? If not, then how are they protected?
>
>Thansk in advance,
>Dave
>
>
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel

Mark & Christine Shulaw
454 Co. Rd. 33
Bluffton, OH. 45817  USA            Email: Frappi at wcoil.com

Your one stop on line source for Maytag Multi-Motor parts.
Parts lists available on request.

Weekdays & Saturday 10 AM to 10 PM Eastern Time 419.358.5206
Saturday 9 AM to 10 PM at cell #419.516.2996 If you have Verizon Cell Phone 
you may call the cell number during the weekday hours. No Sunday calls if 
possible.
I am not an employee or licensed dealer for Maytag Corp. Nor do I represent 
them in any way shape or form. I am only a Collector, Preservationist and 
hobby dealer of Maytag manufactured items of old.   Mark