[SEL] Cast Iron Welding rod

[Clint D]

Curt

Any on line sources to get this nickel rod?
Clint


cgandree at mchsi.com wrote:
> Hi Gary,
> YEEEESSSSSSSSSSSS you got it right and according to a post left on goggle by 
> one of past deceased SEL members (back in 2001) he had given me the contact in 
> the USA and now I will beable to reorder some.  It is properly called Polyweld 
> 700.  This is the best cast iron welding rod made and can really make cast 
> iron repairs an easier job with little or no preheating nor cracking.  I must 
> boast and say that I had repaired a full crack on the underside of my JD 1 
> 1/2hp model E engine that actually went through both sides of the drain hole.
> It really saved my engine and I had used it several other times on cast iron 
> repairs with very good results.  Well worth the extra money the rods cost too.
> Many thanks and Merrry Christmas.
> Curt Andree
>
>
> ----------------------  Original Message:  ---------------------
> From:    "Gary Epps" <garyepps at fidnet.com>
> To:      "The SEL email discussion list" <sel at lists.stationary-engine.com>
> Subject: Re: [SEL] Cast Iron Welding rod
> Date:    Mon, 24 Dec 2007 13:11:51 +0000
>
>   
>> Curt,
>> Is it Weld Mold 706 you are after? I just got several hits when I googled 
>> it.
>>
>> Gary
>> ----- Original Message ----- 
>> From: <cgandree at mchsi.com>
>> To: "SEL Lists" <sel at lists.stationary-engine.com>
>> Sent: Monday, December 24, 2007 6:10 AM
>> Subject: [SEL] Cast Iron Welding rod
>>
>>
>>     
>>> Hi All,
>>> Several years ago there was a discussion on some really super cast iron
>>> welding rod called Poly Mold Weld (or something).  I had actually gotten 
>>> some
>>> from some where and can't remember where (suffering from OMS).  Tried to
>>> goggle it but nothing came up. Sure could use some help getting some so 
>>> hope
>>> some one remembers better then me.
>>> thank you in advance.
>>> Merry Christmas & Happy New Year
>>> Curt Andree
>>> _______________________________________________
>>> SEL mailing list
>>> SEL at lists.stationary-engine.com
>>> http://www.stationary-engine.com/mailman/listinfo/sel
>>>
>>>
>>> -- 
>>> No virus found in this incoming message.
>>> Checked by AVG Free Edition.
>>> Version: 7.5.516 / Virus Database: 269.17.7/1194 - Release Date: 
>>> 12/23/2007 5:27 PM
>>>
>>>
>>>       
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>>     
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>