[SEL] Cast Iron Welding rod

[cgandree at mchsi.com]

Thanks Peter but this Poly Mold rod is more forgiving then nickel rod.  I had 
used all that I had bought and once you ve welded with it you would not go 
back to the nickel stuff.
Curt


----------------------  Original Message:  ---------------------
From:    "Peter Scales" <peter at loud-n-clear.net>
To:      "'The SEL email discussion list'" <sel at lists.stationary-engine.com>
Subject: Re: [SEL] Cast Iron Welding rod
Date:    Mon, 24 Dec 2007 13:38:24 +0000

> Hi Curt
> 
> I think any high-nickel rod would be good for cast iron - sometimes called
> "eutectic" rods.
> 
> Merry Christmas to one and all.
> 
> All the best
> 
>      Pete
> -- 
> Peter Scales  
> 
> > -----Original Message-----
> > From: sel-bounces at lists.stationary-engine.com 
> > [mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of 
> > cgandree at mchsi.com
> > Sent: 24 December 2007 12:11
> > To: SEL Lists
> > Subject: [SEL] Cast Iron Welding rod
> > 
> > Hi All,
> > Several years ago there was a discussion on some really super 
> > cast iron 
> > welding rod called Poly Mold Weld (or something).  I had 
> > actually gotten some 
> > from some where and can't remember where (suffering from 
> > OMS).  Tried to 
> > goggle it but nothing came up. Sure could use some help 
> > getting some so hope 
> > some one remembers better then me.
> > thank you in advance.
> > Merry Christmas & Happy New Year
> > Curt Andree
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> > 
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel