[SEL] Monarch Stationary engine

[cgandree at mchsi.com]

Craig,
If you could send me pic of your engine I am guessing it was actually made by 
Nelson Bros.  I have a Little Jumbo 1 1/2hp model P that I bet is the same.
Curt Andree


----------------------  Original Message:  ---------------------
From:    Craig Buzzell <craigb2 at aol.com>
To:      The SEL email discussion list <sel at lists.stationary-engine.com>
Subject: [SEL] Monarch Stationary engine
Date:    Fri, 14 Dec 2007 20:39:34 +0000

> Hello list; I have just acquired a 1 3/4 hp Monarch. Not sure of the  
> model number yet. It has the older style Webster mag/ ignitor that  
> sits quite aways out the side and is hit & miss . There is a brass   
> fuel primer on the ignitor mount bracket and the oiler sits very near  
> the end of the cylinder. I would guess it was made by Nelson Brothers.
> Any info as to history, build date and running characteristics would  
> be appreciated.
> Thanks;
> Craig Buzzell
> Goleta CA 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel