[SEL] Young Rally

[Germoamer at aol.com]

In a message dated 12/12/2007 9:58:38 AM Eastern Standard Time, 
curt at imc-group.com writes:

Did anyone note the extra bolts on the operator side at the hot tube and 
the water outlet? Not seen this 
before.<http://www.oldengine.org/members/pml/y07/y0700065.JPG>

Curt,
 
After going back and looking at the photo, I believe the pipe on the top 
front of the engine is a filler pipe to fill the cylinder with water.  On mine, at 
the top of the outlet pipe is a tee for filling the cylinder and going back 
to the cooling screen.  In Patrick's photo, there is only a 90 degree elbow and 
no way to fill the cylinder. Could the extra bolt near the water outlet be a 
vent when filling the cylinder or when first starting the engine to get all 
the air out of the system?
 
 
Tom Schmutz
Concord, Va.
Germoamer at aol.com



**************************************See AOL's top rated recipes 
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)