[SEL] Need Release Agent for JB Weld

[Paul Maples]

The filling, drilling and tapping sounds like a good idea Orrin, thanks.

Paul

----- Original Message ----- 
From: "Orrin Iseminger" <oiseming at moscow.com>
To: "'The SEL email discussion list'" <sel at lists.stationary-engine.com>
Sent: Saturday, August 25, 2007 11:51 AM
Subject: Re: [SEL] Need Release Agent for JB Weld


> Paul, Micromark sells a release agent.  I've not used it with JB-Weld,
> however.  I don't see why it wouldn't work, though.
>
> www.micromark.com
>
> I've not had stellar luck with using the usual tricks-of-the-trade for a
> JB-Weld release agent, such as smoking the item with a candle or acetylene
> flame, or spraying with PAM.  JB-Weld likes to stick too well!
>
> You might have better luck filling the hole with JB-Weld, then drilling 
> and
> tapping.  That is the method I use.
>
> Regards,
>
> Orrin
>
>