[SEL] Need Release Agent for JB Weld

[Orrin Iseminger]

Paul, Micromark sells a release agent.  I've not used it with JB-Weld,
however.  I don't see why it wouldn't work, though.  

www.micromark.com

I've not had stellar luck with using the usual tricks-of-the-trade for a
JB-Weld release agent, such as smoking the item with a candle or acetylene
flame, or spraying with PAM.  JB-Weld likes to stick too well!

You might have better luck filling the hole with JB-Weld, then drilling and
tapping.  That is the method I use. 

Regards, 

Orrin

Orrin Iseminger
Colton, Washington, USA
http://users.moscow.com/oiseming/lc_ant_p/menu.htm
So many projects.  So little time.   

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Paul Maples
Sent: Saturday, August 25, 2007 9:16 AM
To: sel at lists.stationary-engine.com
Subject: [SEL] Need Release Agent for JB Weld

Folks I know we have talked this before but I need to know what is a good
release agent for JB Weld, I need to make some new threads in a stripped out
fitting. Thanks.

Paul

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel