[SEL] Need Help on Sherwood Oiler

[Paul Maples]

Thanks Larry, I will give this a try.

Paul

----- Original Message ----- 
From: "Larry Evans" <lfevans at pacbell.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Sunday, April 29, 2007 10:04 PM
Subject: Re: [SEL] Need Help on Sherwood Oiler


> Paul,
>
> If your new cork gaskets are thicker than the original ones you may have
> changed the relationship of the length of the center stem to the tube that
> it moves in causing it to not be able to seat at the bottom.  You could
> test this by temporarily removing the top cork gasket and see if it still
> does not seal.
>
> Regards,
> Larry
>
> At 07:05 PM 4/29/2007, you wrote:
>>Ok Gang once again I need help on what would seemingly be a simple problem
>>and it would probably be a simple problem for anyone but me. The old
>>original Sherwood Oiler on the my Stover engine was very grungy, the
>>