[SEL] Working on a Maytag for my Grandson.

[Dave Rotigel]

Hi Bill,
At 09:22 PM 10/27/2006, you wrote:
>Hey Men,
>My Grandson and I are working on his Maytag and I need to know where I can
>get the tool to slip on the shaft to set the points with before I put the
>flywheel back on,

I have found that a 4 lb. hammer works well for this.

>  also what do I use to get the brass nut out of the bottom of
>the carburetor, where I can clean it good, I believe that takes a special 
>tool
>also.

The same hammer will work well--but you will need to hit the carburetor a 
bit harder!

>Thanks,
>Bill Miller
>Memphis, TN.

         Dave
PS, Id you don't have a 4 lb. hammer handy a medium size ax will work nicely!
>