[SEL] Need Stover Fuel Pump Parts

[Paul Maples]

Your right Jim, the center of the plunger is bored out to 1/2" all the way 
except for the last 1/2" (top) and it is solid. I am going to try and get a 
new plunger one way or another today.

Thanks for the response and advice.

Paul

----- Original Message ----- 
From: "Jim and Diane" <jd.kirkes at verizon.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Monday, October 16, 2006 9:44 PM
Subject: Re: [SEL] Need Stover Fuel Pump Parts


> Hi Paul,
>
> Your pump plunger looks like it would be pretty easy to make.  Get a chunk
> of 5/8 CRS and cut it of a little long and finish the ends to 3 and 3/16 
> and
> do what ever is required for the spring pocket  Looks like an hour or so 
> on
> the lathe maybe less since you did not tell us anything about the internal
> detail.
>
> Jim