[SEL] Chips on the floor....

[Curt]

Thanks Edd. Since you are a machining expert, I've got a question for 
you about tweaking a lathe in. Once I have the bed level all directions 
with a precision level, and if I still experience taper when using the 
tail stock, what is the procedure for dialing in the tailstock? Anyway 
of telling which side of center I may be on before making adjustments to 
the tailstock?
Curt


Edd Payne wrote:

> Great job Curt.Really enjoyed the pics.That old lath will do a lot of 
> work for you.
> EDD PAYNE
> PO Box 364 Gulgong N.S.W
> Australia
> 2852
> Phone:0263742387
> edsengns at optusnet.com.au
> edsengns
> ----- Original Message ----- From: "Curt" <curt at imc-group.com>
> To: "SEL" <sel at lists.stationary-engine.com>; "SEL (Oldengine.org)" 
> <stationary-engine at oldengine.org>
> Sent: Saturday, November 18, 2006 9:13 AM
> Subject: [SEL] Chips on the floor....
>
>
>> Another old piece of heavy iron is running again. A couple of months ago 
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>