[SEL] Piston clearance

[Arnie Fero]

Hi Grant,

I don't have that clearance handy (but others will).  Have you checked how
much "meat" you'll have left at the bottom of the ring grooves after you
turn down the piston and re-cut the ring grooves?

See ya,  Arnie

On Wed, 24 May 2006, Grant Weir wrote:

> I've sleeved my 29' John Deere D and left the bore slightly undersize of the
> stock 6-3/4" size so that I can turn my worn out pistons down to fit.  I
> think it will work.