[SEL] Re: SEL Digest, Vol 26, Issue 22

Richard Backus rbackus at ogdenpubs.com
Mon May 22 09:59:33 PDT 2006


Best method without the special tool is to remove the starter and lock the
crank with a pry bar or large screw driver lodged between the teeth on the
flywheel/flex plate. Then you can set the bolt to specified torque.
Richard


> From: <sel-request at lists.stationary-engine.com>
> Reply-To: <sel at lists.stationary-engine.com>
> Date: Mon, 22 May 2006 12:00:05 -0400
> To: <sel at lists.stationary-engine.com>
> Subject: SEL Digest, Vol 26, Issue 22
> 
> As per the mechanic guy, we used Loc-tite on the bolt and Roger stood
> on the brake and I used the break-over with a cheater and got it as
> tight as I could (I've got the sore muscles to prove it!).  It didn't
> fly apart on the way to work this morning so hopefully it's tight enough!






More information about the sel mailing list